Gecko®815 Chain & Cable Lubricant with Moly

• Thick foaming action evenly coats the surface
• Forms a protective lubricating barrier
• Effective temperature range: 10°F to 400°F
• Contains molybdenum disulfide (MoS₂)
• Extends chain and wire rope service life
• Performs under extreme pressure and temperature conditions
• Water-displacing solvents penetrate cracks and the wire rope core quickly
• Anti-sling adhesion reduces mess during operation
• Reduces wear caused by friction and corrosion
• Provides maximum lubrication and corrosion protection

• Severe climatic conditions
• Bushings
• Cables and chains
• Cranes
• Drag lines
• Drives
• Forklifts
• Pins
• Pulleys and rollers
• Saws
• Wire ropes

1. Shake vigorously for one minute after mixing ball begins to rattle.
2. Spray 8-10 inches from surface.
3. Allow it to penetrate.
4. The second coat gives additional protection.

Handle with care. This is a pressurized container — do not puncture or burn, even after use.
Do not use if the spray button is missing or damaged. Avoid spraying onto open flames, sparks, or any incandescent materials.
Do not smoke while applying this product or until treated surfaces are completely dry.
Keep containers away from cutting, welding, soldering, drilling, or grinding operations, and from all sources of heat or ignition.
Ensure that all handling equipment is properly grounded to prevent static discharge.
Do not reuse empty containers. Avoid prolonged or repeated skin contact.
Use only in well-ventilated areas and wear appropriate personal protective equipment.
Wash hands and exposed skin thoroughly after use and maintain good industrial hygiene practices.

Store in a cool, dry, well-ventilated, and secure area.
Pressurized container — protect from direct sunlight and do not expose to temperatures above 50°C (122°F).
Do not puncture, crush, or incinerate containers.
Keep away from open flames, heat, sparks, and other sources of ignition.
This product may accumulate static electricity that could cause a spark and ignite vapors.
Prevent electrostatic build-up through proper bonding and grounding procedures.
Keep containers tightly sealed in their original packaging.
Store away from incompatible materials (refer to Section 10 of the SDS).
Keep out of reach of children.

Dispose of contents and empty containers in accordance with local, regional, and national regulations.
Refer to the product’s Safety Data Sheet (SDS) for specific disposal recommendations.